Century 925, Installation, Operation, Maintenance, Parts

Page: 4 / 126

TABLE OF CONTENTS
The operator must read and understand
all instructions in this manual
before operating the wrecker.
ii
It is assumed by CENTURY that the Owner/Operator has thorough
knowledge of the accepted and lawful retrieval and towing methods as
dictated by his city, county, or state. CENTURY rejects any liability claim
that may result from the incorrect or unlawful application of its equipment.
Section I - SAFETY PRECAUTIONS I-1 thru I-15
Section II - SPECIFICATIONS II-1 thru II-5
Section III - OPERATIONAL FUNCTIONS
WRECKER III-1 thru III-5
FORMULA III IIIA-1 thru IIIA-3
Section IV - OPERATING INSTRUCTIONS
WRECKER IV-1 thru IV-8
FORMULA III WITH TILT IVA-1 thru IVA-18
STEERING WHEEL LOCK IVB-1 & IVB-2
Section V - MAINTENANCE V-1 thru V-7
MAINTENANCE RECORD V-6 & V-7
Section VI - PARTS VI-1 thru VI-38
BODY ASSEMBLY VI-2 & VI-3
FORMULA III ASSEMBLY VI-4 & VI-5
FORMULA III HYDRAULICS
STANDARD VI-6 & VI-7
WITH OPTIONAL HAND HELD REMOTE VI-8 & VI-9
OUTER CROSSBAR & LIFT ADAPTERS VI-10 & VI-11
925 WRECKER ASSEMBLY VI-12 & VI-13
Section IVA - OPERATING INSTRUCTIONS
WHEEL LIFT (cont’d)
IVA-12
4A.10 OUTER CROSS TUBE REMOVAL
(a) Loosen "T" Handles and fully extend Outer Cross Tubes.
(b) Insert a screwdriver or 1/4" rod into Stop Rod Hole located
beside "T" Handle. See Figure 4A.16.
FIGURE 4A.16
(c) While pushing in to release Stop Rod, pull outer crosstube
off the crossbar. To reinstall outer crosstubes, simply
slide them onto the crossbar. The Stop Rod will
automatically engage when slid all the way on. Tighten "T"
Handles.
4A.11 TOW FORK ADAPTERS
(a) Remove outer crosstubes.
(b) Loosen "T" Handles on Fork Adapters and slide onto
crossbar. See Figure 4A.17.