Page 16
SKU 90589
For technical questions, please call 1-800-444-3353.
To Inflate The Tire:
1.
WARNING!
A burst tire can cause serious injury or even death to the operator
or bystander. Always make sure the wheel rim and the tire are of the same
size. Check the condition of the tire, and make sure it has no defects before
beginning the inflation process. Keep your hands and body as far away from the
tire as possible. Inflate the tire with briefs jets of air, checking the air pressure
frequently. Never inflate a tire above or below the air pressure recommended by
the tire manufacturer.
FIGURE F
NOZZlE
VAlVE STEM
TIRE AIR HOSE
lOCKING lEVER
2.
There is an Inflation Pedal (IT106) on the left side of the Tire Changer. When the
Inflation Pedal is depressed down to its
middle
position, air is released from the
air hose. When the Inflation Pedal is depressed down
completely,
air is released
from the inflation jet nozzles on the Turntable (201).
(See Figures A and F.)
To Mount The Tire Onto The Wheel Rim: (continued)
13. Depress the column tilting pedal;
the column is tilted back to non-working
position.
14. Press the inflating pedal down to the
middle position to start tire inflation. Inflate
the tire with brief jets of air! Checking
the air pressure frequently. Once the
proper air pressure has been reached,
disconnect the nozzle from the valve stem
and screw a valve cap onto the stem.
15. For a tubeless tire, if the bead of the
tire is not well seated, due to a strong
bead, lift tire manually until the upper
bead seals against the rim, then press the
pedal all the way down. A strong jet of air
will be released through the nozzles in the
slides and this will help the bead seal.
