Page 12
SKU 90589
For technical questions, please call 1-800-444-3353.
2. Depress the bead breaker pedal
fully to activate the paddle. Release
pressure on the bead breaker pedal,
when the blade has reached the end
of its travel and/or when the tire bead
is broken. Rotate the tire slightly,
and repeat the procedure around the
entire circumference of the wheel rim
until the bead is completely detached
from the rim.
3. Depress the column tilting pedal;
the column is tilted back to non-
working position. Lock the wheel on
the turntable by depressing the jaw
clamp pedal.
4. Depress the column tilting pedal
again and the vertical Arm will return
to original position.
5. Position the mounting head by
hand against the edge of the rim.
Press the button on the handle. The
vertical Arm and Horizontal Arm will
be automatically locked in position;
meanwhile, the mounting head will be
lifted 1/16”-1/8” above the rim edge.
6. Insert the lever between the tire
bead and the front section of the
mounting head.
1.
dEFlATE THE TIRE FUlly !!!
Open the bead breaker arm by hand
by pushing it towards the outside.
Place the wheel up against the
Rubber Buffer. Bring the Paddle
against the bead about 3/8” from the
edge of the rim.
Repeat Steps #2 through #6 for the other side of the wheel.
6.
(See Figure C.)
To demount The Tire From The Wheel:
