Page 3
SKU 90589
For technical questions, please call 1-800-444-3353.
ElECTRICAl SAFETy
Grounded tools must be plugged into an outlet properly installed and
1.
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded.
If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry electricity away
from the user.
double insulated tools are equipped with a polarized plug (one blade is
2.
wider than the other). This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way.
Double insulation eliminates the need for the
three wire grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators,
3.
ranges, and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
do not expose power tools to rain or wet conditions.
4.
Water entering a power
tool will increase the risk of electric shock.
do not abuse the power Cord.
5.
Never use the power Cord to carry the
tools or pull the plug from an outlet. Keep the power Cord away from
heat, oil, sharp edges, or moving parts. Replace damaged power Cords
immediately.
Damaged Power Cords increase the risk of electric shock.
pERSONAl SAFETy
Stay alert. Watch what you are doing, and use common sense when
1.
operating a power tool. do not use a power tool while tired or under the
influence of drugs, alcohol, or medication.
A moment of inattention while
operating power tools may result in serious personal injury.
dress properly. do not wear loose clothing or jewelry. Contain long
2.
hair. Keep your hair, clothing, and gloves away from moving parts.
Loose
clothes, jewelry, or long hair can be caught in moving parts.
Avoid accidental starting.
3.
be sure the power Switch is off before plugging
in.
Plugging in power tools with the Power Switch on, invites accidents.
Remove adjusting keys or wrenches before turning the power tool on.
4.
A
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
