65
Note: The method test screen appears indicating
the power, temperature, time and ratio.
Note: Press the operation key below SOLIDS to
display the solids data rather than the moisture
data on the screen.
16.
If Autotrack is turned off and a method
identification name or number is required,
press the operation key below ID.
17.
Using the operation keys below the arrows,
position the cursor on (select) the first
number or letter of the sample identifi-
cation. Press ENTER. Continue to position
the cursor on each letter or number and
press ENTER until the identification is
complete.
Note: If using an identification number only, use
the numeric keys to enter the number.
18.
Press READY to return to the method test
screen.
Note: If sample and diluent are weighed on a
balance not connected to the SMART System
5
,
press the operation key below RATIO to enter
the dilution ratio.
19.
Using the numeric keys, enter the dilution
ratio.
Note: The dilution ratio is the ratio between the
amount of sample and the amount of diluent. The
internal dilution ratio is calculated as the sample
weight after the diluent is added divided by the
initial sample weight.
20.
Press ENTER.
21.
Press the operation key below DILUTION
to engage the external balance and activate
the dilution menu.
XXXXXX
Power:
xxx %
Temp (xxx):
xx.x
Time:
xx:xx
Ratio:
xx.xxxx
Wt: x.xxxxg
Place pads on balance and
press TARE.
ID
RATIO
DILUTION
1 2 3 4 5
SAMPLE ID:
0
1 2 3 4 5 6 7 8 9 A B
C D E F G H I J K L M N
O P Q R S T U V W X Y Z
Space
Delete
Highlight choice, press ENTER.
Press READY to continue.
➞
➞
➞
➞
XXXXXX
Power:
xxx %
Temp (xxx):
xx.x
Time:
xx:xx
Ratio:
xx.xxxx
Wt: x.xxxxg
Place pads on balance and
press TARE.
ID
RATIO
DILUTION
1 2 3 4 5
XXXXXX
Power:
xxx %
Temp (xxx):
xx.x
Time:
xx:xx
Ratio:
xx.xxxx
Wt: x.xxxxg
Input ratio, press ENTER.
Entry:
00.0000
ID
RATIO
DILUTION
1 2 3 4 5