manualshive.com logo in svg

CEM Discover SP-D, Operation Manual

Share
Download
CEM Discover SP-D Operation Manual Download Page 42

38 

 

Delete User 

“Delete User” allows the user to delete a current user stored on the system. The currently logged-in user cannot be 
deleted. 
 

CAUTION 

 

A deleted user cannot be restored. 

 
 

 

 
1.  From the “Create New User” screen, use the “+/-” keys to highlight “Delete User.” 
2.  Press the ENTER key. 
3.  Use the “+/-” keys to highlight the user to be deleted. 
4.  Press the ENTER key. 
5.  The user will be given the option to “Delete Selected User?” 
6.  Use the ARROW keys to toggle between “Yes” and “No.” 
7.  Press the ENTER key. 
8.  Press the HOME key to return to the “Discover Home” screen. 
 

Administration 

The “Administration” page is the 2

nd

 

 

page that appears after selecting “Administrative Functions” from the “Discover 

Home” screen. 

This page allows the CEM Service department to perform maintenance on the system and should 

not be revised by users. 
 

 

 

 

Summary of Contents for Discover SP-D






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands