22
NOTE:
To load a method stored on the USB flash drive:
1. Insert a USB device with stored methods into the side of the system. Refer to the section titled “Backup Methods” for
information on how to save methods onto the USB device.
2. Press the DISCOVER key.
3. Press the “+/-” keys to highlight “Load.”
4. Press the ENTER key.
5. Use the “+/-” keys to scroll through the list until the desired user is highlighted.
6. Press the ENTER key to display the user’s methods.
7. Use the “+/-” keys to highlight the desired method.
8. Press the ENTER key to load the method.
9. The main menu is displayed with the loaded method’s name in the title bar.
Data Review
If the USB drive is in position on the side of the Discover during the reaction, the temperature data for each run will
automatically be stored. This data can be viewed on the Discover screen later as a graph or viewed as individual data
points on a computer.
NOTE:
Only USB flash drives supplied by CEM Corporation are compatible with the Discover SP-D Clinical system.
1. Install the USB flash drive containing the desired method data for review.
2. With the main menu displayed, press the DISCOVER key.
3. Using the ARROW and “+/
‐
” keys, highlight “Data Review.”
4. Press the ENTER key.
5. Use the “+/-” keys to highlight the user for which the data is to be reviewed.
6. Press the ENTER key.
7. Use the “+/-” keys to highlight the data to be viewed.
8. Press the ENTER Key. A graph will appear on the screen with a temperature curve.
