CEM Discover SP-D Page 28 Operation Manual Download | Manualshive

Page: 28 / 61

background image

24

7. Press the ENTER key.

8. Use the ARROW keys to highlight “Yes” or “No”.
9. Press the ENTER key. If “yes” was selected the method will be permanently deleted. If “No” is selected the

previous screen will appear.

Discover Home

The Discover home screen allows the users to set operations parameters within the Discover firmware. The Discover
firmware is designed to permit use by three types of users: Standard, Administrator and Guest. A Guest can perform
methods. A Standard User can perform methods and modify all system settings. An Administrator can add, modify, or
delete users; perform tasks related to the maintenance of the system; modify all system settings and perform methods.
The Discover includes three users when shipped:

Administrator (includes all administrator privileges and is password protected

USER (includes all administrator privileges and does not include a password)

Guest (includes Guest privileges)

If the Discover is not being installed by a CEM representative, contact CEM to obtain a password that will permit
administrative rights.

The Discover Home screen will appear differently for users according to their user type: Guest, Standard, and
Administrator.

Guest Standard Administrator

Rxn Programming

The Reaction Programming screen allows the user to return to the main menu screen. The user can also press the
HOME key to return to the main menu.

NOTE:

“Rxn programming” can be viewed by all user types (guest, standard, and administrator).

1.  To view the “Discover Home” screen press the HOME key.
2.  Use the “+/-” keys to highlight “Rxn Programming.”
3.  Press the ENTER key. The main menu screen will appear.

«
...
26
27
28
29
30
...
»

Summary of Contents for Discover SP-D






























































Reviews:

No comments

Related manuals for Discover SP-D

Brand: Rabe Pages: 65

Brand: DARAY Pages: 28

Brand: MacDon Pages: 88

Brand: Jiffy Pages: 15

Brand: Campbell Pages: 2

Brand: ProLights Pages: 28

Brand: B&G Pages: 16

Brand: My-Doc Pages: 32

Brand: Spitzer LIGHTING Pages: 2

Brand: Cameo Pages: 56

Brand: Scilogex Pages: 21

Chlorinsitu-III

Brand: ProMinent Pages: 120

DuraTech 45' 3-Way Retrieval SRL-R

Brand: Falltech Pages: 18

A/C Air Launcher 101050

Brand: CITC Pages: 10

Brand: Meyer Pages: 4

Brand: MacDon Pages: 558

Brand: IN Pages: 6

Brand: Selecta Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands