Cellink BIO X6, User Manual

Page: 135 / 176

BIO X6 User Manual v. 1.0 135
10 Maintenance
10.1 Maintenance plan
Read all general guidelines, warnings, and cautions before performing any
maintenance on the BIO X6.
Always turn the power switch OFF and disconnect the power cord before you
clean or perform maintenance on the product.
Task Action Regularity Check Dates
Visual
inspection and
cleaning
Clean the bioprinter according to the
instructions in Section 10.3 of this
manual.
Every day
before and
after use
Sensors and
stop statuses
Check the sensors by triggering each
sensor manually and checking the
status in the printer sensor and
Utilities menu (sensors and end stop
statuses).
Every 3
months
Software
update
Update the software to the latest
version for the BIO X6. The latest
software can always be found on My
CELLINK at my.cellink.com.
Every 3
months or
after a new
software
release
HEPA filter Replace the pre-filters and HEPA H14
filters.
Every 12
months or
2,000 h of
use