Cellink BIO X6, User Manual

Page: 118 / 176

BIO X6 User Manual v. 1.0 118
7 Shape generator
The Shape generator is a new feature in the Model protocol. It allows you to choose one of
three predefined shapes: box, cylinder, and hemisphere to place on the print surface.
7.1 Create new model
This feature allows you to create constructs smaller than 1mm. 0.10mm is the smallest
possible value. When any of the dimension chosen is less than 1.19mm size, an information
of which gauge should be used will be shown.
In the example below are the settings available for the predefined shape box
Figure 90 Create new shape
1. Create new : Tap to create a new model of a predefined shape (box, cylinder, or
hemisphere)
2. Shape : Tap to show a list of predefined shapes to choose from
3. Name : Tap to specify a name for the model
4. Height : Tap to specify height dimension of the shape
5. Width : Tap to specify width dimension of the shape