Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
29
Parts of machine
Machine Overview
4 Machine Overview
This chapter contains information on using the machine:
• Proper use (page 29)
• Parts of machine (page 29)
• Working and danger areas (page 46)
• Operating description (page 46)
• Operating modes (page 46)
4.1 Proper use
The freely moveable, walk-behind hand-guided machine is only approved for wet cutting of
firmly installed components using manufacturer-approved diamond saw blades.
The components can consist of:
• Cured concrete with or without reinforcement
• Green concrete with or without reinforcement
• Asphalt
Any other or additional use is considered improper.
The machine is expressly not intended for cutting components made of materials not com-
mon in road construction.
TIP
The manufacturer shall not be liable for damage caused by the improper use of the machine.
4.2 Parts of machine
The following sections contain information on the parts of the machine:
• Overview (page 30)
• Engine (page 32)
• Blade guard (page 36)
• Parking brake (page 38)
• Height-adjustable handle (page 39)
• Cutting depth adjustment (page 40)
• Swivelling unit of cutting shaft (page 41)
• Flushing water connection (page 43)
• Visor device (page 45)
