ENGLISH
ENGLISH
22
23
RUNNERFIT STEP BLACK SERIES
RUNNERFIT STEP BLACK SERIES
9. TROUBLESHOOTING
If the problem continues, please, contact the Technical Support Service of Cecotec.
10. TECHNICAL SPECIFICATIONS
Model: Runnerfit Step Black Series
Reference: 07009
Power supply: 220-230V 50Hz
Power: 1000 W
Maximum weight: 120 kg
Foldable system
Running surface: 98x36 cm
Maximum Speed: 10 km/h
Made in China | Designed in Spain
11. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), specifies that old household electrical appliances must not be disposed of
with the normal unsorted municipal waste. Old appliances must be collected separately,
in order to optimize the recovery and recycling of the materials they contain, and reduce the
impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose
of the appliance correctly. If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
8.
CLEANING AND MAINTENANCE
•
Inspect the appliance regularly to detect any damage or wear that may have occurred.
•
Pay special attention to the parts that are most likely to wear off.
•
Replace any defective parts immediately and avoid using the product until it is in perfect
conditions once again.
•
We recommend that you occasionally lubricate the moving parts to avoid premature wear
off.
•
Bear in mind that sweat is corrosive. Do not let it come into contact with the unit.
•
To clean the product, use a sponge dampened with water. Do not use corrosive or solvent
products.
•
Use a dry cloth to clean the plug and the control panel.
•
Make sure the power switch is turned off and that the product is disconnected from the
power supply before carrying out daily maintenance.
•
Do not use the appliance in wet or dusty places that could cause malfunctions.
•
Install the treadmill in flat surfaces to avoid the appliance from falling and causing faults.
•
Do not use the appliance for more than 1 hour. Take a rest after each hour.
•
All parts and components must stay clean, both sides of the treadmill must be cleaned by
removing all rests of dirt. Make sure your shoes are clean before using the product. Use
soap and a dampened cloth to clean the treadmill, do not use solvents. Clean arm’s sweat
and the treadmill after each use.
•
The treadmill has been oiled by the manufacturer with antistatic oil. The machine can be
oiled again after 100 hours of use. Add special oil for treadmills to its lower part: gently lift
the treadmill’s base and apply it.
•
To improve the treadmill’s operating, adjust it if any deviation is observed as consequence
of continuous use and the pressure applied unconsciously by the legs. If any deviation
to the sides is observed, adjust screws on the front part of the base with the Allen key
provided as it is indicated in the picture, until the treadmill is properly centered.
•
If the product is not going to be used for a long period of time, please, store it in a dry and
clean place and avoid it from getting into contact with dust.
•
Do not touch the power button or the power cord with wet hands. Do not pull from the
cord to disconnect the machine. Do not place weight on the cord, do not wind it around
the appliance to avoid it from breaking, do not use the appliance if the cord or the plug do
not make good connection.
•
To fold or unfold the treadmill, take the lock screw out and fold or unfold it as it is indicated
(p.6).
Problem
How to solve it
The treadmill does not
work.
Make sure it is properly connected.
Make sure the switch is on.
The treadmill’s speed is not
the appropriate one.
It is caused by a voltage fall off, wait
until goes back to normal.
