CD Automation Revo M 1PH, User Manual

Page: 33 / 48

CD Automation srl REVO M User’s Manual
REVO_M08
33
17.2 Supply the Electronic Board
The REVO M thyristor unit, to work, requires a voltage supply for the electronic boards. The Max
consumption is 10VA.
The voltage supply for the electronic boards is configured in line with customer requirements that are
defined in the Order Code. The Order Code is written on the identification label.
Warning: Before connecting or disconnecting the unit check that power and control cables
are isolated from voltage sources.
Terminal M4
M4
Description
1 Voltage Supply for Electronic Boards (Auxiliary Voltage)
2 Not Used
3 Voltage Supply for Electronic Boards (Auxiliary Voltage)
To change auxiliary supply voltage sold the correct link-jumper on CD6000M board
The type of mounted transformer depends of the chosen Voltage in the order code.
Transformer Type Link-Jumper JP1+JP2 Link-Jumper JP3
TR-605 120V 90:130V -
TR-605 230V 170:265V 300:530V
TR-605 300V 230:345V 510:690V
If the Auxiliary Voltage (written on the identification label) is different from Supply Voltage (to the load),
use an external transformer with primary equal to load voltage and secondary equal to the Auxiliary
Voltage
M4