CD Automation Revo M 1PH, User Manual

Page: 23 / 48

CD Automation srl REVO M User’s Manual
REVO_M08
23
12 Control Panel
The Control Panel is placed on the front of the thyristor unit, on his display you can visualize the alarms, the input
and output signals and all the configuration parameters.
The function keys is the following:
•
The Function key is used for enter and exit from the menu.
•
The UP key and DOWN key is used to scroll the parameters in the menu and to change data.
•
The ENTER key is used to edit the parameters and to save the modified values.
The Control Panel have three menu, and to enter in one of them you must set correctly the parameter

:
•
Operator Menu (

= 2)
This menù contains a reading parameters that give information on the state of the unit, it include also the base
parameters for quick start, like the value of current and voltage load and the Set-point data.
•
Hardware Menu (

= 5)
This menu contains all the configuration parameters for analogic and digital I/O, and the parameters to set the
serial port like the address and the baudrate.
•
Setup Menu (

= 10)
This menù contains all the setting parameters to configure the thyristor unit, like the firing type, the current
limit, [ecc].