CD Automation Revo M 1PH, User Manual

Page: 18 / 48

CD Automation srl REVO M User’s Manual
REVO_M08
18
11.1 Command Terminals
Warning: Before connecting or disconnecting the unit check that power and control cables
are isolated from voltage sources.
11.1.1 Terminal block M2 Drive M
Terminal Description
1 GND
2 COM digital Input
3 Configurable Enable
4 Configurable Input1
5 Control Input +
6 Control Input -
7 +10V Output
8 Slave Output - (factory connection)
9 Slave (factory connection)
11.1.2 Terminal block M1 Drive M
Terminal Description
10 GND
11 TA1 Input (factory connection)
12 TA1 or TA2 input (factory connection)
13 TA3 input (factory connection)
14 Common alarm relay output
15 Normally open alarm relay output
16 Normally close alarm relay output
11.1.3 Terminal block M3 Drive M
Terminal Description
A+ RS485
B- RS485
11.1.4 Terminal block M4 Drive M
Terminal Description
L1 Aux L1
- Not Connected
L2/N Aux L2/N