20
REVO C
1PH from 300A to 800A
User’s manual
6.8 Wi-Fi Transmitter Module
Models RC_ _ _-_ _ _ _ _-_ _ _ with WiFi option contains a Wi-Fi transmitter module, see model label plate for
details on which module is installed.
The transmitter module is mounted on the top of the microprocessor board.
The module used can be:
Module FCC ID: 2ADUIESP-12-F
Module FCC ID: 2AL3B-ESP-F
802.11b/g/n 2412-2462 MHz
802.11b/g/n 2412-2462 MHz
Output Power:
Output Power:
• 802.11b: 15.58 dBm (Max.)
OR
• 802.11b: 14.0 dBm (Max.)
• 802.11g: 13.72 dBm (Max.)
• 802.11g: 12.8 dBm (Max.)
• 802.11n: 12.53 dBm (Max.)
• 802.11n: 13.6 dBm (Max.)
Antenna gain: 1.0 dBi PCB antenna 11 channels
Antenna gain: 1.0 dBi PCB antenna 11 channels
Unit is assembled from tested components, complete system is tested.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause undesired
operation.
Caution:
no changes or modifications allowed on the equipment not expressly approved by the party responsible
for compliance. It could void the user’s authority to operate the equipment.
The FCC number is located on the right side of the unit, see sample below:
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
OR
Summary of Contents for REVO C
Page 2: ......