CD Automation REVO C, User Manual

Page: 52 / 78

52
REVO C
1PH from 300A to 800A
User’s manual
10.5.8 To reset the power totals:
1) Click Test , if not already on the test view
2) Click Online
3) Click Reset Totals
4) Click Yes
10.5.9 Setting Up and Using Data Logging
To set up data logging:
1) Click Test , if not already on the test view
2) Click Online
3) Click Load Analyzer
4) On the Load Analyzer view click Data
Log
5) In the Data Log window ensure the
slider is set to Log Enabled
6) Click Set Time
7) If necessary Set the date and time and
close the date/time window
8) Set
Log Time
to the number of seconds
between records
9) Click Connect
10) Click
Confi g
11) Click Load Confi guration to view the
current list of logged parameters
12) For up to ten parameters to log:
-Click
+
to add a parameter to the list
-In a row in the list either: Type a parameter’s Modbus address in the
Par
fi eld
OR
-Select the parameter from the drop down list in the
Name
fi eld
13) Click Write Confi guration to send the parameter list to the controller
14) Click
Close
15) Click Disconnect
16) Close the
Data Log
window
10.5.10 To retrieve a data log fi le from the power controller:
1) Click Test , if not already on the test view
2) Click Online
3) Click Load Analyzer
4) Click Connect
5) Select a fi le from the list
6) Click Download
7) Select a location and click Save
8) Wait for the fi le to download. This can take
up to ten minutes for the largest fi le
9) To delete the log fi le from the controller
memory, if desired, click Delete File
10) Click Disconnect
11) Close the Data Log window
12) Close the Load Analyzer window
10.6 Software General information
Here it is described the Confi gurator Software and how use it.
10.6.1 Program Window
Main Menu
Access these menus.
File menu
Exit : close the program
Setting menu
Language
: open language Settings dialog
box
Serial Port : open Serial Port dialog box
Option : open General Option dialog box
? (Help) menu
Message Log : open a serial
communication message view
About : displays the About dialog with the
program name and version and contact
information
Instruments selector
Select the right instrument to use:
HOME : the default view
REVO-C : open the Simple and Test views for a single-phase power controller
REVO-C 3PH
: access the Simple and Test views for a three-phase power controller
MSG : opens a serial communication message view
Status Bar
Indicates information such as time and date, communications port and baud rate.