CD Automation REVO C EXTENDED 2PH, User Manual

Page: 56 / 84

56
REVO C
2PH from 1100A to 2100A
User’s manual
10.5 Using the Confi gurator
After software has been installed, communication has been
set up and model type selected, is possible operate with
power controller.
10.5.1 To view or save a power controller’s settings
using “Simple” view section:
1) Click Simple , if not already on the simple view
2) Click Upload from unit
3) Set the address, if necessary
4) Click READ->
5) Wait for the software to read the parameter settings
6) Click OK
7) If need save the settings in a recipe fi le:
- Click Save
- Name the recipe
- Click
Save button
NOTE! In the simple view the change are not “live”, so
to take eff ect the change in simply section is necessary
download it with download procedure.
10.5.2 To edit a setting in a recipe:
1) Click Simple , if not already on the simple view
2) Click Open existing recipe
3) Locate and select the recipe fi le and click
Open
4) Click OK
5) Click the menu with the setting you want to
change
-
SETUP
- ADVANCED SETUP
- HARDWARE
- COM MUNICATIONS
6) Select the value you want to change
7) Edit the value with the increment and decrement buttons in the fi eld or type the new value and press the
Enter key
8) Repeat steps 5 to 7 for all the changes you want to make
9) To save the settings in a recipe fi le:
- Click Save
- Name the recipe
- Click Save button