CD Automation REVO C EXTENDED 2PH, User Manual

Page: 58 / 84

58
REVO C
2PH from 1100A to 2100A
User’s manual
10.5.8 To reset the power totals:
1) Click Test , if not already on the test view
2) Click Online
3) Click Reset Totals
4) Click Yes
10.5.9 Setting Up and Using Data Logging
To set up data logging:
1) Click Test , if not already on the test view
2) Click Online
3) Click Load Analyzer
4) On the Load Analyzer view click Data
Log
5) In the Data Log window ensure the
slider is set to Log Enabled
6) Click Set Time
7) If necessary Set the date and time and
close the date/time window
8) Set
Log Time
to the number of seconds
between records
9) Click Connect
10) Click
Confi g
11) Click Load Confi guration to view the
current list of logged parameters
12) For up to ten parameters to log:
-Click
+
to add a parameter to the list
-In a row in the list either: Type a parameter’s Modbus address in the
Par
fi eld
OR
-Select the parameter from the drop down list in the
Name
fi eld
13) Click Write Confi guration to send the parameter list to the controller
14) Click
Close
15) Click Disconnect
16) Close the
Data Log
window