WURM DIN-XP, Operator'S Manual

Page: 1 / 4

DIN-XP
Input module
with 16 operation or fault inputs
DIN-XP_V2.7.0_PI_2019-04_EN Subject to technical changes Page 1 of 4
Front view
Features

Inputs for 230V~

Individual selection of operating input or fault input

Load current / zero signal current principle for each input

Setting of priority for all fault inputs

Alarm delay time for all fault inputs

Clear display of signal statuses and voltage statuses

Lamp test and fault message acknowledgement

Simple parameter settings

Alarm relays for priority 1 and 2 available

Selectable relay operating mode

Plug-in screw terminals

Large data memory for signal history

Clear text designations in FRIGODATA XP per input

Evaluation of Prio 1 and Prio 2 subsection faults from a gateway

Direct connection of a CAN-USB to the service socket

Connection to the Wurm system through a Wurm CAN communication bus (C-BUS) and
FRIGODATA XP