background image

- 1 -

BIS-411-LED

Bistable relay

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Electronic bistable pulse relay BIS-411-LED allows switching on 

or off the lighting or other device from several different points 

by parallel connected, momentary (bell) control switches.

The receiver is switched on after a current pulse caused by pres-

sing any momentary (bell) button connected to the relay. After 

the next pulse, the receiver will be switched off.

The relay does not have a „memory” of the contact position, 

which means in the event of a power failure and its  subsequ-

ent return, the relay contact will be set to „off”. This prevents 

the controlled receivers from being switched on automatically 

without supervision after a prolonged power failure.

Purpose

Functioning

Summary of Contents for BIS-411-LED







Reviews: