CC-ISOBUS CCI 1200, Operating Instructions Manual

Page: 151 / 168

Glossary
139
Section Using yield maps and other methods of location analy-
sis such as ground or contour maps, aerial photo-
graphs or multi-spectral images, it is possible, based
on individual experience, to define zones within the
field, if these significantly differ over periods of four to
five years.
If these zones have a sufficient size and, for example
with winter wheat a difference in yield potential of ap-
proximately 1.5 t/ha, it makes sense to , match the
cultivation and agricultural practices in these zones to
the yield potential.
Such areas are then designated as sections.
Section-specific working Satellite support use of an application map.
Terminal The CCI 1200 terminal
Touchscreen Touch-sensitive display for operation of the terminal.
URL Uniform Resource Locator
A standard used for website addressing in the World
Wide Web; the Internet address.
USB Universal Serial Bus:
Serial bus system to connect the terminal to a storage
medium.
UT The Universal Terminal is the human machine inter-
face (HMI) of the ISOBUS. This is the display and op-
erating device.
Each implement connected to the ISOBUS is regis-
tered with the UT and uploads its object pool. You op-
erate the implement via the operating screens of the
object pool.
Delay time The delay time describes the time delay between the
command and the actual activation of a section (e.g.
during spraying, the time from the command: "Switch
on section", until when the agent is actually applied).
WLAN (WiFi) Wireless Local Area Network
Wireless or WiFi network