CC-ISOBUS CCI 1200, Operating Instructions Manual

Page: 127 / 168

Map view
115
9 Map view
CCI.Command is the detailed map view for use with Section Control and
Rate Control.
Using GPS, Section Control automatically switches off the sections of an
ISOBUS implement upon passing over field boundaries and already
treated areas and switches them back on upon leaving them. Possible
overlaps (double treatments) are thus reduced to a minimum and the
driver's work load reduced.
Section Control can be used with all ISOBUS implements provided they
fulfil the requirements for ISOBUS section control.
Setting up for operation
 You have a licence for Section Control and/or Parallel Tracking.
 The licence is entered in the terminal, as described in chapter 4.3,
section Licence data.
 CCI.Command is "on" in app management.
 In the ISOBUS settings
o
the ISOBUS Task Controller function is "on" and
o
a Task Controller Number is set.
1. Press the "Settings" button on the start screen.
 The "Settings" operating screen is displayed.
2. Press the "Apps" button.
 The "Apps" operating screen is displayed.
3. Press the "CCI.Command" button.
 The "CCI.Command" operating screen is displayed.
4. Adjust CCI.Command as described in the following section.
5. Press the "Settings" button on the start screen.
 Setting up is ended.
 The "Settings" operating screen is closed.
Introduction
Prior prepara-
tion