CC-ISOBUS CCI 1200, Operating Instructions Manual

Page: 11 / 168

vii
Both USB interfaces on the left casing side are of type A. Standard flash
drives can be connected.
The USB interfaces on the rear side are type M12. These interfaces pro-
tect the terminal against the penetration of dust and water, even when
there is a connected USB device.
The buzzer is sized so that even if there is a very loud background, ter-
minal and implement audio warnings can be clearly heard.
At connector A, you connect the terminal
 to the ISOBUS and
 to the power supply.
At connector B, you connect the terminal to
 the signal connector,
 an NMEA 0183 GPS receiver,
 the serial GPS output
o
of the tractor,
o
the self-propelled implement or
o
the automatic steering system,
 the serial interface of an N-sensor.
At connector C, you connect the terminal to
 a camera or a camera multiplexer,
 an NMEA 0183 GPS receiver,
 the serial GPS output
o
of the tractor,
o
the self-propelled implement or
o
the automatic steering system,
 the serial interface of an N-sensor.
USB
Buzzer
Connector