CC-ISOBUS CCI 1200, Operating Instructions Manual

Page: 74 / 168

Display of camera images
62
Start automatic camera switching:
9. Press centrally on the camera screen.
 The buttons for camera selection are displayed.
10. Press the red camera number with the "Stop" symbol.
 Automatic camera switching starts.
 The red button displays the "Play" symbol.
Note
If a camera image is not used for automatic camera switching, leave the cam-
era off when selecting the sequence and display duration.
Note
The settings for the sequence and the display duration of the camera images
are retained until you change the settings.
After terminal restart you only need to start automatic camera switching.
Implement controls camera image
Some implements specify which camera image is displayed. This makes sense
if attention must be drawn to a particular event or the implement.
These implements
 control the video multiplexer via a separate cable or
 take control via the video miniplexer without separate cabling.
In both cases, you cannot influence the selection of the camera image and the
display duration via CCI.Cam.
 Refer to the operating instruction of your implement to see whether this
function is available.