CC-ISOBUS CCI 1200, Operating Instructions Manual

Page: 78 / 168

Implement settings
66
6.1 Setting up for operation
An ISOBUS tractor makes the following tractor data available via the
ISOBUS to all network members:
 ground and wheel speed,
 PTO speed,
 direction of travel and
 position of the rear 3-point hitch.
When the tractor is not connected to the ISOBUS, the terminal reads the
tractor data via the signal connector in the tractor.
You require
 cable B and
 cable type H.
1. Switch the terminal off.
2. Connect cable B to connector B of the terminal.
3. Insert the 12-pole plug on the type H cable in the signal coupling on
cable B.
4. Insert the signal plug on cable H in the signal connector socket.
5. Switch on the terminal.
Tractor data
Signal con-
nector