CC-ISOBUS CCI 1200, Operating Instructions Manual

Page: 107 / 168

Implement settings
95
6. Press the "Protocol" button.
 The "Protocol" selection list is displayed.
7. Select the sensor protocol.
8. Press the "Settings" button on the start screen.
 Setting up is ended.
 The "Settings" operating screen is closed.
The settings can be changed at any time. You have the following setting
options:
CCI.Convert on/off
Switch CCI.Convert on or off.
 Press the "CCI.Convert" button.
 The switch changes its position.
Serial interface
The terminal has one serial interface at each of the connectors B
and C. CCI.Convert specifies the connector to which the sensor
must be connected. Changing is not possible.
 The connector is indicated.
 Connect the sensor to this connector. Use cable B for connector
B or cable C1 or C2 for connector C.
Select protocol
Select the protocol to which the sensor sends a value.
1. Press the "Protocol" button.
 The "Protocol" selection list is displayed.
2. Select the protocol.
3. End the Process with "Back".
 The "CCI.Convert" operating screen is displayed.
 The selected protocol is indicated on the "Protocol" button.
Adjust
CCI.Convert