Casio PV-S460 User Manual Download Page 106

Page: 106 / 187

104

Chapter 8 Pocket Sheet

2. Tap

Menu Bar

to display the menu bar, and then tap

Edit

–

Cut

Edit

–

Copy

•

With

Cut

, the original data is deleted from the cell and placed onto the

clipboard.

•

With

Copy

, a copy of the data is placed onto the clipboard without

changing the original data.

•

The data includes format settings (page 93) as well as any text, numbers,
and mathematical expressions. The border specification, however, is not
included.

•

You can use the

Paste

command to paste the contents of the clipboard

into another cell or range of cells.

Pasting Cell Data

Important!

•

Pasting data into a cell or range of cells that already contains data causes the
current data to be replaced with the pasted data.

1. Select the cell or range of cells to which you want to paste the data

currently on the clipboard.

•

See “Making a Cell the Active Cell” on page 85.

•

Data can be placed onto the clipboard using the cut or copy (page 103)
operation.

2. Tap

Menu Bar

to display the menu bar, and then tap

Edit

–

Paste

•

The data is pasted from the clipboard into the currently active cells.

•

The pasted data includes format settings (page 93) as well as any text,
numbers, and mathematical expressions. No border specification is
included.

Note

•

Up to 256 characters can be pasted when pasting data from another application.

•

The clipboard has a capacity of approximately 2KB.

Summary of Contents for PV-S460




























































































































































































Search results

Summary of Contents for PV-S460

Reviews:

Related manuals for PV-S460

Brands by name

Popular brands

Casio PV-S460, User Manual

Search results

Summary of Contents for PV-S460

Reviews:

Related manuals for PV-S460

Brands by name

Popular brands