Casio PV-S460 User Manual Download Page 116

Page: 116 / 187

114

Chapter 10 Pop Up Tools

To select a time zone city

1. On the clock screen, tap the city name you want to change.
2. Highlight the name of the city you want to select by tapping it or by

using

Action

control.

3. Tap

Set

to register the selected city.

To switch between standard time and daylight saving time
(DST)

On the clock screen, tap on the DST (summer time) setting of one of the
clocks to toggle it between DST on (

) and DST off (no indicator).

Using the Calculator Screen

This screen provides you with a 12-digit calculator that can perform a variety of
calculations.

To display the calculator

On the pop up tool screen, tap the

icon.

•

You can also display the calculator in certain modes by tapping the

button in the data input tool bar.

•

You can close the calculator screen from the display by tapping

DST (summer time) setting

Summary of Contents for PV-S460




























































































































































































Search results

Summary of Contents for PV-S460

Reviews:

Related manuals for PV-S460

Brands by name

Popular brands

Casio PV-S460, User Manual

Search results

Summary of Contents for PV-S460

Reviews:

Related manuals for PV-S460

Brands by name

Popular brands