Casio PV-S460 User Manual Download Page 2 | Manualshive

Page: 2 / 187

background image

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE
U.S.A. (not applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Proper connectors must be used for connection to host computer and/or peripherals in order
to meet FCC emission limits.

Cable or cradle (OA-300PV) ..... PV-S460/PV-S660 to Windows PC or SB-90

Declaration of Conformity

Model Number:

PV-S460/PV-S660

Trade Name:

CASIO COMPUTER CO., LTD.

Responsible party: CASIO, INC.
Address:

570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

resulting from the use of this manual.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third

parties which may arise through the use of the PV Unit.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused

by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to
back up all important data on other media to protect against its loss.

• No part of this manual may be reproduced in any form without the express written consent

of the manufacturer.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United
States and/or other countries.

«
1
2
3
4
...
»

Summary of Contents for PV-S460




























































































































































































Reviews:

No comments

Related manuals for PV-S460

Brand: XTRONIC Pages: 56

Brand: GAMING TRUNK Pages: 2

Brand: Casio Pages: 27

Brand: Casio Pages: 30

Brand: Casio Pages: 65

Rolodex RFPC-04

Brand: Franklin Pages: 14

Brand: Soyntec Pages: 10

Brand: U-Line Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands