manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 588

20070201

  

k

  Backing Up Main Memory Data

  You can back up all the data in the main memory and store it in the storage memory. Later 
you can restore the backed up data to the main memory when necessary.

  

u

   To back up main memory data 

  1. On the initial 

 MEMORY

  mode screen press 

4

 (BKUP).

 

 

 

 

 

 

 

 

 

 

  2. Press 

1

 (SAVE).

      This displays a folder selection screen. 

 

 

 

 

 

 

 

 

  3. Use 

f

  and 

c

  to select the folder where you want to save the data. 

  4. Press 

w

  to start the backup. 

 

 

  The message “Complete!” appears when the backup operation is fi nished. 

  Press 

J

  to return to the screen displayed in step 1. 

  The following message appears if there is already backup data in the storage memory. 

  

 

 

 

 

 

 

 

 

 

 

  Press 

1

 (Yes) to back up the data, or 

6

 (No) to cancel the backup operation.

  A “Memory Full” occurs when there is not enough space available in the storage memory to 
complete the backup operation.

12-7-14

MEMORY Mode

 # Backup data is saved in a fi le named 

BACKUP.g1m.  

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands