manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 58

20070201

1-7 Syntax Help

When you input a command, syntax help displays its syntax.

u

  To display syntax help

 

1. Input a command.

 

  • This will cause syntax information to appear.

 

Syntax help

 

2. Syntax help will disappear when you press the next key.

u

  To redisplay syntax help

After you input a command and press another key (which causes syntax help to disappear), 
you can redisplay syntax help by moving the cursor so it is located immediately to the right of 
the command.

 

Cursor located to the right of the command.

⇒

⇒

   # To avoid hiding the input cursor, syntax help 

information appears either at the top or at the 
bottom of the screen.

  When the cursor is at the 

bottom of the screen.

  # Syntax help will appear only if “On” is selected 

for the “Syntax Help” setting on the Setup 
screen.

#   Syntax help appears in the 

RUN

 • 

MAT

 mode 

(for the arithmetic calculation mode only, not the 
Matrix Editor mode), the 

PRGM

 mode, and the 

STAT

 mode.

# Syntax help also will appear when you input 

variable data, and explain the variable data

# Redisplay of syntax help is possible in the 

RUN

 • 

MAT

 mode only (arithmetic calculation 

mode only, excluding the Matrix Editor). 

1-7-1

Syntax Help

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands