manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 38

20070201

   3. 

Press 

1

 (COPY) to copy the highlighted text to the clipboard, and exit the copy range 

specifi cation mode.

 

 

   

 

 

  The selected characters are not changed when you 
copy them.

 

 

  To cancel text highlighting without performing a copy operation, press 

J

 .

 

 

  Math input mode

   

1. Use the cursor keys to move the cursor to the line you want to copy. 

   2. 

Press 

!

 

i

 (CLIP) . The cursor will change to “  ”.

   

 

 

 

 

 

 

 

 

   3. 

Press 

1

 (CPY • L) to copy the highlighted text to the clipboard.

 

 

 

 

  

u

   To cut the text

   

1. Move the cursor (

 

I ) to the beginning or end of the range of text you want to cut and 

then press 

!

 

i

 (CLIP). This changes the cursor to “  ”.

 

 

   

 

 

   

2. Use the cursor keys to move the cursor and highlight the range of text you want to cut.

 

 

   

 

 

   3. 

Press 

2

 (CUT) to cut the highlighted text to the clipboard.

 

 

   

  Cutting causes the original characters 
to be deleted.

 

 

  The CUT operation is supported for the Linear input mode only. It is not supported for the Math 
input mode. 

1-3-6

Inputting and Editing Calculations

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands