manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 417

20070201

8-5-17

Command Reference

 Receive ( / Send ( 

  

 Function:

  This command receives data from and sends data to a connected device.

  

 Syntax:

  Receive (<data>) / Send (<data>)

  

 Description:

 

  • This command receives data from and sends data to a connected device.

 

 

  • The following types of data can be received (sent) by this command.

 

 

    • Individual values assigned to variables

    • Matrix data (all values - individual values cannot be specifi ed)

    • List data (all values - individual values cannot be specifi ed)

 

 

 OpenComport38k/CloseComport38k 

  

 Function:

  Opens and closes the 3-pin COM port (serial).

  

 Description:

  See the Receive38k/Send38k command below.

 

 

 Receive38k/Send38k 

  

 Function:

  Executes data send and receive at a data rate of 38 kbps. 

  

 Syntax:

  Send38k <expression>

 

 

   

 

<variable name>

   

 

Receive38k

   

<list 

name> 

 

 

  

 Description:

  

  • The OpenComport38k command must be executed before this command is executed.

 

 

  • The CloseComport38k command must be executed after this command is executed.

 

 

  • If this command is executed when the communication cable is not connected, program 

execution will continue without generating an error.

 

 

 

 

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands