manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 233

20070201

  

k

  Drawing a Dynamic Graph Locus

  Description

  Turning on the Dynamic Graph locus setting on the Setup screen lets you overlay a graph 
drawn by changing the coeffi cient values.  

  Set Up

  1. From the Main Menu, enter the 

 DYNA

  mode.

  2. Make V-Window settings.

 

 

  Execution

  3. On the Setup screen, select “On” for “Locus”. 

  4. Use the cursor keys to select the function type on the built-in function type list.

  5. Input values for coeffi cients, and specify which coeffi cient will be the dynamic variable.

  6. Specify the start value, end value, and increment.

  7. Specify Normal for the draw speed.

  8. Draw the Dynamic Graph.

 

 

5-8-3

Dynamic Graphing

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands