Casio CFX-9850GB PLUS User Manual Download Page 182

Page: 182 / 600

20070201

5-2-2

Controlling What Appears on a Graph Screen

V-Window Setting Precautions

• Inputting zero for T

ptch causes an error.

• Any illegal input (out of range value, negative sign without a value, etc.) causes an

error.

• When T

max is less than T

min, T

ptch becomes negative.

• You can input expressions (such as 2

) as V-Window parameters.

• When the V-Window setting produces an axis that does not fi t on the display, the scale

of the axis is indicated on the edge of the display closest to the origin.

• Changing the V-Window settings clears the graph currently on the display and

replaces it with the new axes only.

• Changing the Xmin or Xmax value causes the Xdot value to be adjusted automatically.

Changing the Xdot value causes the Xmax value to be adjusted automatically.

• A polar coordinate (

=) or parametric graph will appear coarse if the settings

you make in the V-Window cause the T

ptch value to be too large, relative to the

differential between the T

min and T

max settings. If the settings you make cause

the T

ptch value to be too small relative to the differential between the T

min and T

max settings, on the other hand, the graph will take a very long time to draw.

• The following is the input range for V-Window parameters.

–9.999999999

97 to 9.999999999

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CFX-9850GB PLUS

Reviews:

Brands by name

Popular brands

Casio CFX-9850GB PLUS, User Manual

Search results

Summary of Contents for CFX-9850GB PLUS

Reviews:

Brands by name

Popular brands