manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 584

20070201

  Overwrite check is performed for the following types of data only. All other types of data are 
copied, without checking for data fi les with the same name. 

  • Programs

  • Matrices

  • List fi les

  • Graph memories

  • Dynamic Graph memories

  • Spreadsheet data

  Overwrite check is performed for data of the same type only. If different types of data have 
the same name, the copy operation is performed without regard to the data with the same 
name.

  Overwrite check applies only to the destination of the copy operation. 

 

 

  Type mismatch error check 

  eActivity data, add-in applications, add-in languages, add-in menus, and backup data cannot 
be copied to main memory. Attempting to do so will cause a type mismatch error.

12-7-10

MEMORY Mode

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands