Casio CFX-9850GB PLUS User Manual Download Page 468

Page: 468 / 600

20070201

Filling a Range of Cells with the Same Content

You can use the following procedure to fi ll a range of cells with the same formula, expression,
value, or text.

To fi ll a range of cells with the same content

Example

To use the “FILL” command to fi ll cells A2 through B3 with the formula
= A1+1

The A1 cell name of the formula is a relative reference. This means the
formula is = A1+1 in cell A2, = A2+1 in cell A3, etc.

In this example, it is assumed that 1 is already input into cell A1, and 2 is
input into cell B1.

1. Select the range of cells from A2 through B3.

• See “To select a range of cells” (page 9-3-4) for more information.

2. Press

(EDIT)

(

)

(FILL).

• This displays the Fill dialog box.

This is the range of cells you selected in step 1.

3. While the “Formula” line is highlighted, enter the content you want to be fi lled into each

of the cells in the selected range.

• Here we will enter “=A1+1”.

9-4-13

Inputting and Editing Cell Data

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CFX-9850GB PLUS

Reviews:

Brands by name

Popular brands

Casio CFX-9850GB PLUS, User Manual

Search results

Summary of Contents for CFX-9850GB PLUS

Reviews:

Brands by name

Popular brands