Case 721G Stage IV, Operator'S Manual

Page: 86 / 522

3 - CONTROLS AND INSTRUMENTS
WARNING
Fall hazard!
Always lock the cab doors in the full open or full closed position before using the handrails on the
doors.
Failure to comply could result in death or serious injury.
W0133A
Cab door
Use the key to lock or unlock the cab door from outside
the machine. Use the cab door handle to open the cab
door from the outside.
To lock in place, open the cab door completely until the
cab door latches in place against the cab.
NOTICE: lock the cab door into the full open or full closed
position before using the door hand hold.
NOTE: the key provided with the machine can be used
to lock and unlock the various panels and to activate the
engine starter switch functions.
LEIL15WHL0502AA
2
To unlock the cab door from the fully open (locked) posi-
tion, pull the knob located inside of B pillar.
LEIL17WHL1482AB
3
Inside opening of the cab door
Push down on the lever to open the cab door from the
inside.
To secure the cab door in the open position, push the cab
door back slowly until the cab door locks on the cab door
catch at the rear of the cab.
LEIL17WHL1483AB
4
3-2