Case 721G Stage IV, Operator'S Manual

Page: 200 / 522

4 - OPERATING INSTRUCTIONS
Return-to-travel
Use the return-to-travel function to automatically stop the
loader bucket while traveling downward at the carry height
selected. To enable the return-to-travel function, press the
return-to-travel button
(3) .
The green LED indicator lights up to indicate that the func-
tion is active.
To set the return-to-travel function proceed as follows:
1. Briefly press the corresponding button (3) on the mul-
tifunction keypad to activate the function; the green
LED indicator lights up to indicate that the function is
active.
2. Set the attachment or the bucket to the desired loca-
tion.
3. Press and hold the button (3) on the multifunction key-
pad until the green LED indicator light flashes (approx-
imately
2 s ).
4. The return-to-travel function is now set. Display will
prompt that the detent position is saved.
LEIL16WHL1132AB
6
To actuate the return-to-travel function, move the joystick
into the full forward LOWER position until the function acti-
vation point is reached. When the function activation point
is reached, the operator will notice more resistance from
the joystick. If released, the joystick will automatically re-
turn to the HOLD (central) position and the lift arms will
continue to lower until the arms reach the desired travel
position. If you move the joystick when the return-to-travel
function is activated, the loader arms will stop.
LEIL17WHL2071AB
7
4-26