Case 721G Stage IV, Operator'S Manual

Page: 113 / 522

3 - CONTROLS AND INSTRUMENTS
Three function valve - one control lever (joy-
stick) with one auxiliary function
Lift arm and bucket control (1)
A. DUMP
B. ROLLBACK
A - B. AUTOMATED BUCKET METERING – used to im-
prove material metering out of the bucket at a consistent
rate. To engage automated functionality, move the joy-
stick rapidly back and forth from “A” Dump to “B” Rollback
position. The bucket accelerates more quickly while this
motion is maintained after 4 neutral point crossings. Reg-
ular bucket control resumes as soon as the back and forth
motion is stopped.
C. HOLD (central position) - The loader arms and bucket
will not move when the control lever is in the HOLD po-
sition. When released, the control lever will automatically
return to the HOLD position.
Lift Arm Control (2)
D. FLOAT – When in the FLOAT position, the loader
bucket floats across the rough ground.
E. LOWER
F. RAISE
Auxiliary control (2)
G. AUXILIARY FUNCTION (WITH DETENT)
H. AUXILIARY FUNCTION (WITH DETENT)
LEIL16WHL1289AB
5
51483153
6
NOTE: since the decal is applied on the right-hand side
window, the directions are to be intended as follows:
D, E, H: Forward
F, G: Backward
A: Right-hand
B: Left-hand
3-29