24
1
2
0
4
3
OPERATION HOME-SAFE® PROGRAM
OPERATION FAN-MINDER™ PROGRAM
1.
To operate the Home-Safe Program – Turn the
1
2
0
4
3
power button off for at
least 5 seconds�
2.
Turn the
1
2
0
4
3
on� Immediately press and hold the "3" button for 5 seconds�
A series of tones will be heard through the piezo-buzzer indicating the
command has been accepted�
Note: This program overrides all manual control of lights and fan�
3.
The lights will automatically cycled on and off in a controlled sequence as
follows: ON 1 hour, OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then
OFF 2 hours� This seven hour pattern will repeat continuously so that a
different pattern of lighting is seen each day of the week�
4.
4) To cancel the Home-Safe Program, press the
1
2
0
4
3
Button OFF for five
seconds�
The Fan-Minder feature will add to your comfort when used in the bedroom� The program
reduces the speed of the fan each two-hour interval to compensate for cooling night air�
1.
To operate the lights for Light Minder Program – Turn the
1
2
0
4
3
power button off for
at least 5 seconds�
2.
Turn the
1
2
0
4
3
on� Immediately press and hold the "2" button for 5 seconds� A
series of tones will be heard through the piezo-buzzer indicating the command
has been accepted� Once the lights turn on, they will automatically turn off after 2
hours�
3.
The fan will respond with three descending tones� A timer is now initiated and the fan
will reduce one speed for each two-hour interval� The fan will not, however, descend
below the first or the lowest speed�
4.
You may increase the fan speed by pressing and holding any of the fan speed buttons until the desired
speed is reached, then release it� The fan will again reduce one speed for each 2 hour interval�
5.
To cancel the Fan-Minder Program, turn the
1
2
0
4
3
OFF for 5 seconds�
The Light-Minder Program automatically turns OFF the fan mounted lights after two
hours� To enter the Light-Minder Program:
1.
To operate the lights for Light Minder Program – Turn the
1
2
0
4
3
power button off
for at least 5 seconds�
2.
Turn the
1
2
0
4
3
on� Immediately press and hold the "1" button for 5 seconds� A
series of tones will be heard through the piezo-buzzer indicating the command
has been accepted� Once the lights turn on, they will automatically turn off after
2 hours�
3.
Light operation still remains normal, if you leave the room and turn OFF the
lights, the lights will blink to indicate the Light Minder command has been
accepted� The lights will stay on for 2 hours and then begin to dim� After thirty seconds have elapsed,
the lights will turn completely off� In CFL Mode, the lights will not dim, but shut off after 2 hours�
4.
To cancel the Light Minder Program, press the
1
2
0
4
3
power button and leave off for five seconds�
LIGHT-MINDER® PROGRAM
Light-Minder
