15
V
icente
Step 9.
Carefully tuck the wires around the
Receiver and Hanging Bracket as not to loosen the
wire caps�
Step 10.
Insert 2 Canopy Screws into the Hanging
Plate diagonally across from each other so they
match the keyholes on the canopy�
Canopy Screws
Keyhole Slots
Step 11.
Raise the Canopy over the Hanger Bracket�
Align the partially installed screws with the key slots
in the canopy�
Step 12.
Twist the Canopy clockwise to secure�
Step 13.
Install the third & fourth canopy screws in
the round holes on Canopy� Securely tighten all four
screws�
Step 14.
Using both hands, push the Canopy Trim
ring up to the top of the Canopy�
Step 15.
Twist the Canopy Trim ring clockwise to
secure it to the Canopy�
Keyhole Slot
Round
Hole
WARNING:
Do not let Hanger
Bracket or Canopy crimp the
wires�
CANOPY HARDWARE
SECURING THE CANOPY
Screw Driver
Canopy Screw (4)
