12
UP-LIGHT ASSEMBLY
Upper Bulb (5)
Step 1.
Remove each of the 5 Upper Bulbs from
their packs and Screw into the Bulb Sockets around
the top part of the fan�
Note: When replacing bulbs, only replace with max
15 watt bulbs�
HANGING THE FAN
Step 1.
Trim wires to about 6" from the top of the
downrod�
Step 2.
Strip 1/2" of insulation off each wire using
wire strippers� Raise the fan and place the ball into
the hanger bracket�
Step 3.
Align the notch on the ball with the indent
in the hanger bracket� (Rotate the fan until you hear
the notch pop into place�)
Indention
Notch
WARNING:
Fan may fall if
not assembled as directed
in these installation
instructions�
