18
Step 9.
Align the keyhole slots in the Light Kit with
the Light Kit Screws and raise the Light Kit�
Step 10.
Turn the Light Kit clockwise until the Light
Kit Screws are firmly situated in the narrow end of
the keyhole slots�
Step 11.
Install the remaining screw into the Light
Kit Mounting Plate�
Step 12.
Tighten all four screws firmly�
Step 13.
Screw the two 50 Watt Halogen bulbs into
the socket� Do not touch the glass bulb with your
fingers–it is extremely important that the glass be
clean� If it is touched, or dirty, clean carefully with a
tissue� A dirty glass bulb will cause the bulb to fail
almost immediately�
Halogen Bulb
(50 Watt)
Finial
Light Kit Stem
WARNING:
Do not touch the glass bulbs with
your fingers� It is extremely important that the
glass be clean� If it is touched, or dirty, clean
carefully with a tissue� A dirty glass bulb will
cause the bulb to fail almost immediately�
Step 14.
Raise the Glass up to the Light Kit
Mounting Plate�
Step 15.
Screw the Finial onto the bottom of the
Light Kit Stem to secure Light Kit�
When installing the halogen bulb, carefully cut off the end of the plastic sleeve the bulb comes in
and hold the bulb by the plastic sleeve to screw it into the socket.
Socket
Glass
