CAS CI-502A, Owner'S Manual

Page: 81 / 88

`
82
Appendix 3. Error Code Table
(1)Error that can occur in the Weighing Mode
ERROR 01
▣
Reason for Error
Data stored in the internal memory was deleted due to electric shock.
☞
Troubleshoot
Do the necessary designations in the Set Mode.
ERROR Lc
▣ Reason for Error
The load cell is not connected properly or there is a problem in
the A/D Converter.
☞
Troubleshoot
Check the connection between the scale and the unit.
UNPASS
▣ Reason for Error
The initial zero range has exceed the F13 intial zero range in the Set Mode.
☞ Troubleshoot
Check the weight on scale, and change the F13 value range in
the Set Mode.
ERROR 04
▣ Reason for Error
A key was pressed for a long time or there is a problem in the
key part.
☞
Troubleshoot
Do the key test in Test Mode 1, and if this message continues to appear without any
actual problems, contact the A/S department of our company.
OVER
▣ Reason for Error
A key was pressed for a long time or there is a problem in the
key part.
☞ Troubleshoot
Do the key test in Test Mode 1, and if this message continues to appear without any
actual problems, contact the A/S department of our company.