Carver 46 VOYAGER, Owner'S Manual

Page: 55 / 180

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
4627 5/04
2.2.2.38 Lower Helm Accessory
This breaker controls the flow of electricity to any aftermarket accessories
installed at the optional lower helm. Switch this breaker “ON” to activate
these accessories. Refer to the accessories’ manuals for information on
operating the accessories.
2.2.2.39 Lower Helm DC Outlet
This breaker controls the flow of electricity to the 12-volt outlet located at
the optional lower helm. You can operate various types of 12-volt equipment
from the outlet, such as a cellular phone, spot light, and laptop computer.
Switch this breaker “ON” to activate the outlet.
2.2.2.40 Spare
This breaker is reserved for aftermarket accessories you install on your
boat.
2.2.2.41 Bilge Blower (1 - 4)
These four breakers control the flow of electricity to the bilge blower con-
trols at the helm, and to the Bilge Blower switch at the upper left corner of
this breaker panel. Switch these breakers “ON” to activate the controls. Use
the controls to manually operate the bilge blowers. The bilge blowers also
operate automatically when the starboard engine ignition switch is turned
on.
2.2.2.42 Auto Pilot
This breaker controls the flow of electricity to the optional automatic pilot-
ing system. To supply power to the auto pilot, switch this breaker “ON.”
Refer to the OEM information for details on operating the auto pilot.
2.2.2.43 VHF Radio
This breaker controls the flow of electricity to the optional VHF radio. To
supply power to the radio, switch this breaker “ON.” Refer to the OEM
information for details on operating the radio.
2.2.2.44 Radar
This breaker controls the flow of electricity to the optional radar system.
To supply power to the radar, switch this breaker “ON.” Refer to the
OEM information for details on operating the radar.
2.2.2.45 Bridge GPS / Plotter
This breaker controls the flow of electricity to the optional global posi-
tioning system and chart plotter. To supply power to these systems,