Carver 46 VOYAGER, Owner'S Manual

Page: 107 / 180

S
ECTION
4 I
NTERNAL
S
YSTEMS
4627 11/02
6. Turn the overboard discharge pump switch “ON.” The switch is located
next to the Y-valve. Refer to the “Engine Room” portion of Section 9
for the exact location of this switch. This activates the overboard dis-
charge pump, which pumps the waste overboard.
When the waste tank is empty, turn the overboard discharge pump “OFF.”
Operating the pump when the waste tank is empty can damage the pump.
7. After all waste is pumped overboard, turn the overboard discharge
pump switch “OFF.”
8. Remove the starboard waste tank deck plate labeled “WASTE” using
the removal tool supplied with your boat. This plate is located on the
starboard side deck amidships; it is the more forward “WASTE” deck
plate. Refer to the “Deck Plates” portion of Section 9 for the exact
location of this plate.
9. Flush the waste tank by pouring a few gallons of fresh water through
the “WASTE” deck fitting. Reactivate the overboard discharge pump
and remove the fresh water and any remaining waste, then turn the
pump “OFF.”
10. Replace the “WASTE” deck plate.
11. Turn the waste tank selector Y-valve so that its handle points to the
port waste tank hose.
12. Turn the overboard discharge pump switch “ON.”
When the waste tank is empty, turn the overboard discharge pump “OFF.”
Operating the pump when the waste tank is empty can damage the pump.
13. After all waste is pumped overboard, turn the overboard discharge
pump switch “OFF.”
14. Remove the port waste tank deck plate labeled “WASTE” using the
removal tool supplied with your boat. This plate is located on the
starboard side deck amidships, just aft of the starboard waste tank
deck plate. Refer to the “Deck Plates” portion of Section 9 for the
exact location of this plate.
15. Flush the waste tank by pouring a few gallons of fresh water through
the “WASTE” deck fitting. Reactivate the overboard discharge pump