Carver 46 VOYAGER, Owner'S Manual

Page: 110 / 180

I
NTERNAL
S
YSTEMS
S
ECTION
4
4627 11/02
When the grey water tanks are empty, turn the overboard discharge pump
“OFF.” Operating the pump when the grey water tanks are empty can
damage the pump.
7. After all grey water is pumped overboard, turn the overboard discharge
pump switch “OFF.”
8. Remove the grey water tanks deck plate labeled “WASTE” using the
removal tool supplied with your boat. This plate is located on the
starboard side deck amidships; it is the furthest-aft “WASTE” deck
plate. Refer to the “Deck Plates” portion of Section 9 for the exact
location of this plate.
9. Flush the grey water tanks by pouring a few gallons of fresh water
through the “WASTE” deck fitting. Reactivate the overboard discharge
pump and remove the fresh water and any remaining grey water, then
turn the pump “OFF.”
10. Close the overboard discharge seacock.
11. Replace the “WASTE” deck plate.
12. On the DC Control Center, switch the Waste Pump circuit breaker
“OFF.”