Carver 46 VOYAGER, Owner'S Manual

Page: 49 / 180

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
4627 5/04
2.2.2.1 Generator
Use this switch to start, stop, or preheat the generator. Refer to the OEM
information for details on operating the generator.
2.2.2.2 Bilge Blower
Use this switch to operate the four bilge blowers. To provide electricity to
this switch, switch the four Bilge Blower circuit breakers on this panel
“ON.”
2.2.2.3 Grey Water Level Gauge
This gauge indicates the amount of water in the optional water tanks. To
activate the grey water monitoring system, switch the Grey Water Monitor
circuit breaker on this panel “ON.”
2.2.2.4 Water Level Gauge
This gauge indicates the amount of water in the fresh water tanks. To
activate the fresh water monitoring system, switch the Water Monitor
circuit breaker on this panel “ON.”
2.2.2.5 Voltmeter
The voltmeterindicates the amount of voltage available from the “house”
battery. Refer to “Monitoring Battery Voltage Levels” earlier in this
section for more information on the voltmeter.
2.2.2.6 Systems DC Main
This breaker controls the flow of electricity to all of the other circuit break-
ers on this panel. To supply power to the other circuit breakers, switch the
Systems DC Main breaker “ON.” To cut the power to the other breakers,
switch this breaker “OFF.”
2.2.2.7 Cablemaster
This breaker controls the flow of electricity to the optional Cablemaster’s
motor and its transom-mounted controls. To supply power to the motor and
controls, switch this breaker “ON.” Refer to the OEM information for details
on operating the Cablemaster.
2.2.2.8 Salon Lights
This breaker controls the flow of electricity to the light switches in the
salon. To supply power to the switches, switch this breaker “ON.” Because
the salon light switches are microprocessor-controlled dimmers, if power to
the lights is lost, you must switch this circuit breaker “OFF” then back
“ON” to reset the dimmers.